LNK624DG
| Parameters | |
|---|---|
| Published | 2009 |
| Series | LinkSwitch®-CV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 230V |
| Terminal Pitch | 1.27mm |
| Frequency | 100kHz |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 3 |
| Output Voltage | 6V |
| Max Output Current | 268mA |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Output Current | 268mA |
| Output Power | 6.5W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 54 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 54% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
LNK624DG Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tube case, the ac dc converter is available.Surface Mount is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.There are a total of 7 terminations.A ac/dc converter with 8 pins is available.A total of 8/7 pins are present on the ac-dc converter.It belongs to the manufacturer family of LinkSwitch?-CV .A total of 3 outputs need to be run.Currently, the output current is set to 268mA .This AC/DC converter produces a voltage of 6V as its output.High efficiency can be achieved when AC to DC converters frequency is set to 100kHz .You can read the standard of REACH SVHC : No SVHC .In the AC to DC transformer of a coverter, the output power generated is 6.5W .Across the converter, the minimum supply voltage is 85V .There is a maximum voltage supply across the converter of 265V volts.Always keep this AC to DC converter set to 230V .It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .
LNK624DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 8 pins
Output Current at 268mA
LNK624DG Applications
There are a lot of Power Integrations LNK624DG AC DC Converters applications.
- Power adapters for network devices
- Standby Power for General Off-Line Applications
- USB type-c v1.2 chargers with optional VDM
- Set Top Boxes (STB)
- MP3
- USB-PD 2.0
- Power adapters for monitors
- Adapters for Handheld Electronics
- AC/DC LED Driver applications
- White goods
