LNK624PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | LinkSwitch®-CV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 11W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 230V |
| Frequency | 100kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 3 |
| Output Voltage | 700V |
| Max Output Current | 268mA |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 440μA |
| Power Dissipation | 5.5W |
| Output Current | 600mA |
| Output Power | 6.5W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 54 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 54% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK624PG Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.In total, there are 7 terminations.There are 8 pins on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Through Hole .Currently, it is acdc converter of the manufacturer family of LinkSwitch?-CV .There are 3 outputs to run.There is 600mA output current set.In this AC to DC transformer, the output voltage is 700V .The power AC DC is capable of high efficiency when operated at a frequency of 100kHz .SVHC for REACH can be found in the standard No SVHC .In the AC to DC transformer of a coverter, the output power is 6.5W .There should be no less than 85V voltage across the converter.265V is the maximum supply voltage across the converter.At all times, this AC to DC converter should be set to 230V .The AC to DC power converter's input voltage (AC) should be below 265V .
LNK624PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 600mA
LNK624PG Applications
There are a lot of Power Integrations LNK624PG AC DC Converters applications.
- 3.3V power supplies
- Tablets
- Small off-line low voltage power supplies
- White goods
- RCC SMPS
- Adapter/Charger for Cell
- Automotive Telematics
- Adapter/Charger for Cordless Phones
- AC/DC Adaptors/Chargers for E-books
- Portable Apparatus
