banner_page

LNK625DG

7 Terminations8 Pin AC to DC power converterLinkSwitch?-CV Series 3 OutputsMin 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK625DG
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 730
  • Description: 7 Terminations8 Pin AC to DC power converterLinkSwitch?-CV Series 3 OutputsMin 85V VMax 265V V(Kg)

Details

Tags

Parameters
Published 2009
Series LinkSwitch®-CV
JESD-609 Code e3
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
Terminal Finish Matte Tin (Sn)
Power Rating 13.5W
Max Power Dissipation 13.5W
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 230V
Terminal Pitch 1.27mm
Frequency 100kHz
Pin Count 8/7
JESD-30 Code R-PDSO-G7
Number of Outputs 3
Output Voltage 700V
Voltage 700V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 480μA
Power Dissipation 6.5W
Output Current 790mA
Output Power 8W
Topology Flyback
Min Input Voltage 85V
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 54 %
Max Supply Voltage (AC) 265V
Duty Cycle 54%
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height Seated (Max) 1.75mm
Length 4.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube

LNK625DG Overview


A ac to dc converter of the package 8-SOIC (0.154, 3.90mm Width), 7 Leads contains the ac to dc converter.There is a AC/DC power converter of Tube available.Surface Mount is mounted in the way of this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.Total terminations are 7 .There are 8 pins on the ac/dc converter.There are a total of 8/7 pins on the ac-dc converter.It is a member of LinkSwitch?-CV manufacturer family.The number of outputs to run is 3 .There is 790mA output current set.In this AC to DC transformer, the output voltage is 700V .The power AC DC is capable of high efficiency when operated at a frequency of 100kHz .In the following link, you will find the REACH SVHC standard: No SVHC .Input voltage for the AC to DC converter is available under 265V .Coverters generate 8W in terms of output power.An input voltage of less than 85V volts can be used with the AC to DC inverter.There should be no less than 85V voltage across the converter.It is possible to supply 265V voltage across the converter.At all times, this AC to DC converter should be set to 230V .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.

LNK625DG Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 8 pins
Output Current at 790mA

LNK625DG Applications


There are a lot of Power Integrations LNK625DG AC DC Converters applications.

  • Standby power supplies for VCR
  • LED Driver
  • Automotive Infotainment
  • Home Appliance Applications
  • Adapters
  • Rice Cooker
  • Appliances
  • Replaces linear transformers
  • Battery chargers for media tablets
  • Adapter/Charger for Cell

Write a review

Note: HTML is not translated!
    Bad           Good