LNK625PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | LinkSwitch®-CV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 13.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 230V |
| Frequency | 100kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 3 |
| Output Voltage | 6V |
| Max Output Current | 353mA |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 480μA |
| Power Dissipation | 6.5W |
| Output Current | 353mA |
| Output Power | 8W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 54 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 54% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK625PG Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter Tube is available for this product.In this case, the AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.In total, it has 7 terminations.The ac/dc converter has 8 pins.There are 8 pins on the ac-dc converter.It belongs to the manufacturer family of LinkSwitch?-CV .There are 3 outputs to be run.There is 353mA output current set.There is 6V output voltage from this AC/DC converter.High efficiency can be achieved when AC to DC converters frequency is set to 100kHz .You can read the standard of REACH SVHC : No SVHC .Coverters generate 8W in terms of output power.A minimum voltage supply across the converter is 85V .The maximum supply voltage across the converter is 265V .It is imperative that this AC to DC converter is set to 230V at all times.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK625PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 353mA
LNK625PG Applications
There are a lot of Power Integrations LNK625PG AC DC Converters applications.
- Consumer electronics
- Battery chargers for cordless
- SMPS house keeping power supplies
- Power Adaptors
- Power tools
- Standby and Auxiliary Power Supplies
- Lighting controls
- Chargers for cell/cordless phones
- Low-Voltage I/O System Power
- AC/DC LED Driver applications
