LNK626DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | LinkSwitch®-CV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 10W |
| Max Power Dissipation | 17W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 230V |
| Pin Count | 8/7 |
| Number of Outputs | 3 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 520μA |
| Output Power | 8.5W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 54 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK626DG Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The ac dc converter is available in Tube case.Surface Mount is mounted in the way of this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.There is 100kHz switching frequency.A total of 7 terminations have been recorded.The ac/dc converter has a total of 7 pins.There are 8/7 pins on the ac-dc converter.It belongs to a manufacturer family of LinkSwitch?-CV .A total of 3 outputs are to be processed.REACH SVHC standard can be found at No SVHC .The AC to DC converter can be powered under 265V voltage.The output power of a coverter is assumed to be 8.5W .It is possible to use the AC to DC inverter with an input voltage less than 85V V.A minimum voltage of 85V is required across the converter.Across the converter, a maximum supply voltage of 265V may be applied.Always keep this AC to DC converter set to 230V .There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK626DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 7 pins
LNK626DG Applications
There are a lot of Power Integrations LNK626DG AC DC Converters applications.
- Adapter/Charger for Cordless Phones
- Low-Voltage I/O System Power
- Open Frame Switching Power Supply
- Battery chargers for cellular phones
- Dimmers
- Set-top boxes
- Switching AC-DC Charger
- Home Appliance Applications
- LED lights
- Industrial controls
