LNK626PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | LinkSwitch®-CV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 17W |
| Max Power Dissipation | 17W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 230V |
| Frequency | 100kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 3 |
| Output Voltage | 700V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 520μA |
| Power Dissipation | 8.5W |
| Output Current | 1.08A |
| Output Power | 10W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 54 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 54% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK626PG Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.There are a total of 7 terminations.The ac/dc converter has a total of 8 pins.There are a total of 8 pins on the ac-dc converter.It is a member of LinkSwitch?-CV manufacturer family.A total of 3 outputs need to be run.We have set the output current to 1.08A .This AC/DC converter produces a voltage of 700V as its output.AC to DC converter reaches high efficiency when operated at a frequency of 100kHz .You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter input voltage can be powered under 265V .In the AC to DC transformer of a coverter, the output power is 10W .Input voltages less than 85V volts can be used to operate the AC to DC inverter.A voltage of 85V is the minimum supply voltage across the converter.It is possible to supply 265V voltage across the converter.It is important to keep this AC to DC converter set to 230V .The AC to DC power converter's input voltage (AC) should be below 265V .
LNK626PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 1.08A
LNK626PG Applications
There are a lot of Power Integrations LNK626PG AC DC Converters applications.
- Portable audio
- Battery chargers for mobile devices with touchpad display
- Wireless System
- Auxiliary Power Supply
- ATX/BTX Auxiliary Power
- Industrial controls
- Low power ac?dc Adapters for Chargers
- Power tools
- Battery chargers for media tablets
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
