LNK632DG
| Parameters | |
|---|---|
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2015 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Max Supply Voltage | 700V |
| Min Supply Voltage | 50V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Output Power | 3.1W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 105kHz |
| Max Input Voltage | 265V |
LNK632DG Overview
In the package 8-SOIC (0.154, 3.90mm Width), 7 Leads , the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.This AC DC converter employs ANALOG CIRCUIT analog IC type.The switching frequency reaches 105kHz .There have been 8 terminations of this program.A ac/dc converter with 7 pins is available.The pins of the ac-dc converter total to 8 .Surface Mount are the recommended mounting method for the ac dc converters.It belongs to the family of LinkSwitch?-II manufacturers.A total of 1 outputs are available for processing.SVHC for REACH can be found in the standard No SVHC .There is an option to power the AC to DC converter input voltage under 265V .In the AC to DC transformer of a coverter, the output power generated is 3.1W .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .A minimum supply voltage of 50V is sufficient for it to operate.
LNK632DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 105kHz
With 7 pins
LNK632DG Applications
There are a lot of Power Integrations LNK632DG AC DC Converters applications.
- Standby power supplies for TV
- RCC SMPS
- MP3
- Utility meters
- Home appliances
- Automotive Infotainment
- Automotive Clusters
- Automotive Telematics
- Auxiliary Power Supplies
- Smartphones
