LNK6418K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | LinkSwitch™-3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Max Power Dissipation | 10W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 700mA |
| Output Current | 1A |
| Output Power | 10W |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Supply Voltage (AC) | 264V |
| Duty Cycle | 55% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Supply Voltage (AC) | 90V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| RoHS Status | RoHS Compliant |
LNK6418K Overview
In the 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad package, the ac to dc converter is embedded.In Tube case, the ac dc converter is available.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.At this point, the switching frequency reaches Up to 85kHz .A total of 11 terminations have been recorded.Suitable mounting is provided by Surface Mount .It is a member of LinkSwitch?-3 manufacturer family.In this AC to DC transformer, there are 1 outputs to run.Currently, the output current is set to 1A .The output power of a coverter generates 10W .A minimum voltage of 90V is required across the converter.The maximum supply voltage across the converter is 264V .
LNK6418K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at Up to 85kHz
Output Current at 1A
LNK6418K Applications
There are a lot of Power Integrations LNK6418K AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- Standby power supplies for IR
- AC/DC Adaptors/Chargers for E-books
- Tablets
- Digital cameras
- Appliances
- LED lights
- USB type-c v1.2 chargers with optional VDM
- LED Driver
- Adaptors for Portable Media Player
