LNK6763K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Power Rating | 21W |
| Max Power Dissipation | 35W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 900μA |
| Output Current | 12.5μA |
| Output Power | 21W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 66 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6763K Overview
There is a ac to dc converter embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .In Tube AC/DC power converter, it is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .At this point, the switching frequency reaches 120kHz~136kHz .In total, there are 11 terminations.On the ac/dc converter, there are 11 pins.The ac dc converters is suitable for mounting by Surface Mount .A member of the LinkSwitch?-HP manufacturer family, it has the following characteristics.The number of outputs to run is 1 .AC to DC converter is set to 12.5μA for the output current.This AC/DC converter produces a voltage of 50V as its output.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.The output power of a coverter is assumed to be 21W .A voltage of less than 85V V can be used with the AC to DC inverter.This converter requires a minimum supply voltage of 85V volts.Across the converter, the maximum supply voltage is 265V .There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6763K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 12.5μA
LNK6763K Applications
There are a lot of Power Integrations LNK6763K AC DC Converters applications.
- AC?DC USB chargers for Cameras
- AC/DC Adaptors/Chargers for E-books
- Home Appliance Applications
- Air Conditioning
- Laptops and personal digital assistants
- Adapter for ADSL
- LED lights
- Air conditioners
- Dimmers
- RCC SMPS
