LNK6763V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 15W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.2mA |
| Output Current | 15μA |
| Output Power | 15W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6763V Overview
A ac to dc converter of the package 12-SDIP (0.412, 10.46mm) Exposed Pad contains the ac to dc converter.The AC/DC power converter is available in Tube .This AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.This AC DC converter employs ANALOG CIRCUIT analog IC type.At this point, the switching frequency reaches 120kHz~136kHz .There have been 11 terminations of this program.The ac/dc converter has 11 pins.This AC to DC converter belongs to the LinkSwitch?-HP manufacturer family.The ac to dc conversions are included in Switching Regulator or Controllers .We have set the output current to 15μA .In the following link, you will find the REACH SVHC standard: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.A coverter produces 15W watts of output power.If the input voltage is less than 85V V, the AC to DC inverter can be used.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .
LNK6763V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6763V Applications
There are a lot of Power Integrations LNK6763V AC DC Converters applications.
- Low-Voltage I/O System Power
- Utility meters
- Open Frame Switching Power Supply
- Air conditioners
- Power adapters for network devices
- Set-top boxes
- AC/DC Adaptors/Chargers for PDAs
- Tablets
- DVD players
- Z-Wave
