LNK6766V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 26W |
| Max Power Dissipation | 34W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.6mA |
| Output Current | 15μA |
| Output Power | 21W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6766V Overview
A ac to dc converter of the package 12-SDIP (0.412, 10.46mm) Exposed Pad contains the ac to dc converter.It is available in Tube AC/DC power converter.Through Hole mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.When the switching frequency reaches 120kHz~136kHz , the process is complete.It has a total of 11 terminations.On the ac/dc converter, there are 11 pins.This AC to DC converter belongs to the LinkSwitch?-HP manufacturer family.The ac to dc conversions can be found in Switching Regulator or Controllers .We have set the output current to 15μA .REACH SVHC standard can be found at No SVHC .Input voltage for the AC to DC converter is available under 265V .The output power of a coverter generates 21W .The AC to DC inverter can be used with an input voltage of less than 85V V.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
LNK6766V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6766V Applications
There are a lot of Power Integrations LNK6766V AC DC Converters applications.
- Battery chargers for media tablets
- Appliance Power Supplies
- ZigBee
- Power tools
- Battery chargers for cordless
- Consumer electronics
- Adapters for Handheld Electronics
- Set Top Boxes (STB)
- Remotely-controlled appliances
- White goods
