LNK6767K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Power Rating | 43W |
| Max Power Dissipation | 59W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.4mA |
| Output Current | 12.5μA |
| Output Power | 36W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 66 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6767K Overview
12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.It is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.A ANALOG CIRCUIT analog integrated circuit is used in this AC DC converter.120kHz~136kHz is the switching frequency.There are a total of 11 terminations.The ac/dc converter has 11 pins.Suitable mounting is provided by Surface Mount .A member of the LinkSwitch?-HP manufacturer family, it has the following characteristics.Running 1 outputs is available.There is 12.5μA output current set.This AC/DC converter produces a voltage of 50V as its output.Here is the standard for REACH SVHC : No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .There is 36W output power generated by a coverter.The AC to DC inverter may be operated with an input voltage less than 85V volts.A minimum voltage supply across the converter is 85V .There is a maximum supply voltage of 265V across the converter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
LNK6767K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 12.5μA
LNK6767K Applications
There are a lot of Power Integrations LNK6767K AC DC Converters applications.
- Tablets
- Automotive Clusters
- Set -Top Box (STB) Power Supply
- Battery Chargers
- Charger
- Switching AC-DC Adapter
- Auxiliary Power Supplies
- LED lights
- Z-Wave
- Power tools
