Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
12-SDIP (0.412, 10.46mm) Exposed Pad |
Surface Mount |
NO |
Number of Pins |
11 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2014 |
Series |
LinkSwitch™-HP |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
11 |
HTS Code |
8542.39.00.01 |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
30W |
Max Power Dissipation |
41W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
1.78mm |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
1.7mA |
Output Current |
15μA |
Output Power |
25W |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
120kHz~136kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Duty Cycle |
64% |
Output Isolation |
Isolated |
Voltage - Breakdown |
650V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Height Seated (Max) |
2.34mm |
Length |
10.46mm |
Width |
10.16mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK6767V Overview
12-SDIP (0.412, 10.46mm) Exposed Pad is the package in which the ac to dc converter is embedded.It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.At this point, the switching frequency reaches 120kHz~136kHz .There are a total of 11 terminations in it.The ac/dc converter has a total of 11 pins.The product is acdc converter of the LinkSwitch?-HP manufacturer family.AC to DC converter is included in Switching Regulator or Controllers .We are setting the output current to 15μA .REACH SVHC standard can be found at No SVHC .Input voltage for the AC to DC converter is available under 265V .Coverters generate 25W as their output power.An input voltage of less than 85V V is required to operate the AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
LNK6767V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6767V Applications
There are a lot of Power Integrations LNK6767V AC DC Converters applications.
- LED lights
- AC--DC Adapter
- LED Driver
- Power adapters for monitors
- Switching AC-DC Charger
- Adapter for ADSL
- Standby and Auxiliary Power Supplies
- Standby Power Supply
- Networking
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)