LNK6768V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 34W |
| Max Power Dissipation | 47W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6768V Overview
An embedded ac to dc converter is included in 12-SDIP (0.412, 10.46mm) Exposed Pad package.In Tube case, the ac dc converter is available.Through Hole is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type ANALOG CIRCUIT analog integrated circuit.When the switching frequency reaches 120kHz~136kHz , the circuit is closed.As a result, it has had 11 terminations.There are 11 pins on this ac/dc converter.The ac dc converters is suitable for mounting by Through Hole .It belongs to the family of LinkSwitch?-HP manufacturers.You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter input voltage can be powered under 265V .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.The AC to DC power converter's input voltage (AC) should be below 265V .
LNK6768V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6768V Applications
There are a lot of Power Integrations LNK6768V AC DC Converters applications.
- Battery Chargers
- Cleaners
- Standby power
- Standby power supplies for IR
- Linear Adapter Replacements
- Adapter/Charger for Cordless Phones
- Replaces linear transformers
- Appliances
- AC/DC Adaptors/Chargers for Cordless Phone
- AC/DC Adaptors/Chargers for Cell Phones
