LNK6769V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 39W |
| Max Power Dissipation | 54W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6769V Overview
In the 12-SDIP (0.412, 10.46mm) Exposed Pad package, the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.When the switching frequency reaches 120kHz~136kHz , the process is complete.In total, there are 11 terminations.On this ac/dc converter, there are 11 pins.The ac dc converters are suitable for mounting by Through Hole .The product is acdc converter of the LinkSwitch?-HP manufacturer family.You can read the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.If the input voltage is less than 85V V, the AC to DC inverter can be used.AC to DC power converters should be able to accept input voltages (AC) below 265V .
LNK6769V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6769V Applications
There are a lot of Power Integrations LNK6769V AC DC Converters applications.
- Humidifier
- Small off-line low voltage power supplies
- 3.3V power supplies
- Battery chargers for cellular phones
- White goods
- MPS parts
- Standby power
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Set Top Boxes (STB)
- Replaces linear transformers
