Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
7-SIP, 6 Leads, Exposed Pad, Formed Leads |
Surface Mount |
NO |
Number of Pins |
6 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2014 |
Series |
LinkSwitch™-HP |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
HTS Code |
8542.39.00.01 |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
27W |
Max Power Dissipation |
35W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Terminal Pitch |
1.27mm |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
1.2mA |
Output Current |
15μA |
Output Power |
21W |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
120kHz~136kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Duty Cycle |
64% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Width |
2.01mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK6773E Overview
The ac to dc converter is embedded in 7-SIP, 6 Leads, Exposed Pad, Formed Leads package.The AC/DC power converter Tube is available for this product.In this case, the AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.In this AC to DC transformer, the switching frequency is 120kHz~136kHz .Total terminations are 6 .On this ac/dc converter, there are 6 pins.A member of the LinkSwitch?-HP manufacturer family, it has the following characteristics.Switching Regulator or Controllers contains the ac to dc conversions.We are setting the output current to 15μA .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter can be powered under 265V voltage.There is 21W output power generated by a coverter.The AC to DC inverter may be operated with an input voltage less than 85V volts.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
LNK6773E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6773E Applications
There are a lot of Power Integrations LNK6773E AC DC Converters applications.
- Standby power supplies for TV
- Low power ac?dc Adapters for Chargers
- Standby Power Supply
- Open Frame Switching Power Supply
- Shaver Charger
- Battery chargers for cellular phones
- USB type-c v1.2 chargers with optional VDM
- Low-Voltage I/O System Power
- USB-PD 2.0
- Cleaners