LNK6773K
| Parameters | |
|---|---|
| Output Power | 21W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 66 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Power Rating | 21W |
| Max Power Dissipation | 35W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 50V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 900μA |
| Output Current | 12.5μA |
LNK6773K Overview
It is embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs ANALOG CIRCUIT analog IC type.At this point, the switching frequency reaches 120kHz~136kHz .There are a total of 11 terminations.On this ac/dc converter, there are 11 pins.The ac dc converters are suitable for mounting by Surface Mount .A member of the LinkSwitch?-HP manufacturer family, it has the following characteristics.A total of 1 outputs are to be processed.The output current is set to 12.5μA .It produces a voltage of 50V .You are able to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.A coverter produces 21W watts of output power.A voltage of less than 85V V can be used with the AC to DC inverter.Supply voltage across the converter must be 85V at all times.This converter can operate at a maximum supply voltage of 265V .The AC to DC power converter's input voltage (AC) should be below 265V .
LNK6773K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 12.5μA
LNK6773K Applications
There are a lot of Power Integrations LNK6773K AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Power adapters for monitors
- AC--DC Adapter
- Set Top Boxes (STB)
- Replacements for bulky plug-in transformers
- Wall switches
- Battery chargers for cellular phones
- AC/DC Adaptors/Chargers for PDAs
- Industrial controls
- Portable Apparatus
