LNK6774E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 36W |
| Max Power Dissipation | 47W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.3mA |
| Output Current | 15μA |
| Output Power | 30W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Width | 2.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6774E Overview
It is embedded in package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .There is a AC/DC power converter of Tube available.There is a AC/DC converter mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.120kHz~136kHz is the switching frequency.In total, there are 6 terminations.On the ac/dc converter, there are 6 pins.This AC to DC converter belongs to the LinkSwitch?-HP family of manufacturers.AC to DC converter is included in Switching Regulator or Controllers .15μA is set as the output current.REACH SVHC standard can be found at No SVHC .Input voltages under 265V can be used to power the AC to DC converter.The output power of a coverter is assumed to be 30W .It is possible to use the AC to DC inverter with an input voltage less than 85V V.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
LNK6774E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6774E Applications
There are a lot of Power Integrations LNK6774E AC DC Converters applications.
- Vacuum Cleaner
- MPS parts
- Adapter for ADSL
- Appliances
- Small off-line low voltage power supplies
- LED Driver
- Humidifier
- AC/DC LED Driver applications
- USB type-c v1.2 chargers with optional VDM
- IoT Applications
