LNK6774K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 28W |
| Max Power Dissipation | 39W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Length | 10.16mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6774K Overview
12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad is the package in which the ac to dc converter is embedded.It is available in Tube AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.As soon as the switching frequency reaches 120kHz~136kHz , the circuit is closed.Total terminations are 11 .Approximately 11 pins are present on the ac/dc converter.Suitable mounting is provided by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-HP family of manufacturers.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.The AC to DC inverter can be used with an input voltage of less than 85V V.Input voltage (AC) should be below 265V .
LNK6774K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6774K Applications
There are a lot of Power Integrations LNK6774K AC DC Converters applications.
- Air conditioners
- Universal input AC/DC adapters (15W - 45W)
- SMPS house keeping power supplies
- Dimmers
- Low-Voltage I/O System Power
- LED Driver
- USB-PD 2.0
- Humidifier
- Cellular phone chargers
- Battery chargers for media tablets
