LNK6774V
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 28W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.3mA |
| Output Current | 15μA |
| Output Power | 16W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
LNK6774V Overview
There is a ac to dc converter embedded in package 12-SDIP (0.412, 10.46mm) Exposed Pad .In Tube case, the ac dc converter is available.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.There is 120kHz~136kHz switching frequency.It has a total of 11 terminations.Approximately 11 pins are present on the ac/dc converter.It is a member of LinkSwitch?-HP manufacturer family.The following ac to dc conversions are contained in Switching Regulator or Controllers .15μA is set as the output current.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 265V .The output power of a coverter generates 16W .An input voltage of less than 85V volts can be used with the AC to DC inverter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6774V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6774V Applications
There are a lot of Power Integrations LNK6774V AC DC Converters applications.
- AC?DC USB chargers for Cameras
- Battery chargers for smart phones
- Handheld/Battery-Powered Systems
- Shaver Charger
- Switching AC-DC Charger
- Adapters for Handheld Electronics
- Power adapters for monitors
- Standby Power Supplies
- USB-PD 2.0
- Wall switches
