banner_page

LNK6775K

11 Terminations11 Pin AC to DC power converterLinkSwitch?-HP Series 1 Outputs120kHz~136kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK6775K
  • Package: 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
  • Datasheet: PDF
  • Stock: 331
  • Description: 11 Terminations11 Pin AC to DC power converterLinkSwitch?-HP Series 1 Outputs120kHz~136kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Number of Outputs 1
Output Voltage 50V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 1.1mA
Output Current 12.5μA
Output Power 26W
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 120kHz~136kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 66 %
Max Supply Voltage (AC) 265V
Duty Cycle 64%
Output Isolation Isolated
Voltage - Breakdown 725V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height Seated (Max) 2.49mm
Width 8.89mm
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Number of Pins 11
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2014
Series LinkSwitch™-HP
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 11
Power Rating 31W
Max Power Dissipation 42W
Terminal Position DUAL

LNK6775K Overview


The ac to dc converter is embedded in 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad package.In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.In this AC DC converter, an analog integrated circuit (IC) of type ANALOG CIRCUIT is employed.When the switching frequency reaches 120kHz~136kHz , the process is complete.There are a total of 11 terminations.On this ac/dc converter, there are 11 pins.It are possible to mount thare ac dc converters by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-HP manufacturer family.AC to DC converter is necessary to run 1 outputs.Currently, the output current is set to 12.5μA .The output voltage of the AC/DC converter is 50V .REACH SVHC standard can be found at No SVHC .An input voltage of 265V is available for powering the AC to DC converter.Coverters generate 26W in terms of output power.A voltage of less than 85V V can be used with the AC to DC inverter.Supply voltage across the converter must be 85V at all times.A maximum voltage of 265V can be applied across the converter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.

LNK6775K Features


Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 12.5μA

LNK6775K Applications


There are a lot of Power Integrations LNK6775K AC DC Converters applications.

  • Appliance Power Supplies
  • WiFi Wireless
  • Open Frame Switching Power Supply
  • Standby Power for General Off-Line Applications
  • Power adapters for monitors
  • Low-Voltage I/O System Power
  • Humidifier
  • Power Adaptors
  • Automotive Telematics
  • Standby power supplies for TV

Write a review

Note: HTML is not translated!
    Bad           Good