LNK6775V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 22W |
| Max Power Dissipation | 30W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.4mA |
| Output Current | 15μA |
| Output Power | 19W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6775V Overview
A ac to dc converter of the package 12-SDIP (0.412, 10.46mm) Exposed Pad contains the ac to dc converter.The AC/DC power converter type is Tube .Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs ANALOG CIRCUIT analog IC type.As soon as the switching frequency reaches 120kHz~136kHz , the circuit is closed.In total, it has 11 terminations.There are 11 pins on this ac/dc converter.It belongs to a manufacturer family of LinkSwitch?-HP .Switching Regulator or Controllers includes the ac to dc conversions.The output current is set to 15μA .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .A coverter produces 19W watts of output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6775V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6775V Applications
There are a lot of Power Integrations LNK6775V AC DC Converters applications.
- Set Top Boxes (STB)
- AC?DC USB chargers for Tablets
- MP3
- Set -Top Box (STB) Power Supply
- USB-PD 2.0
- Automotive Clusters
- AC/DC Adaptors/Chargers for Cell Phones
- White goods
- Vacuum Cleaner
- Remotely-controlled appliances
