Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
7-SIP, 6 Leads, Exposed Pad, Formed Leads |
Surface Mount |
NO |
Number of Pins |
6 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2014 |
Series |
LinkSwitch™-HP |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
HTS Code |
8542.39.00.01 |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
68W |
Max Power Dissipation |
88W |
Terminal Position |
ZIG-ZAG |
Number of Functions |
1 |
Terminal Pitch |
1.27mm |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
1.6mA |
Output Current |
15μA |
Output Power |
60W |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
120kHz~136kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Duty Cycle |
64% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Width |
2.01mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK6776E Overview
An embedded ac to dc converter is included in 7-SIP, 6 Leads, Exposed Pad, Formed Leads package.There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.At this point, the switching frequency reaches 120kHz~136kHz .In total, it has 6 terminations.There are 6 pins on this ac/dc converter.A member of the LinkSwitch?-HP manufacturer family, it has the following characteristics.There are a ac to dc conversions included in Switching Regulator or Controllers .It has been set to 15μA for the output current.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.It is assumed that a coverter generates 60W as its output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.Input voltage (AC) should be below 265V .
LNK6776E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6776E Applications
There are a lot of Power Integrations LNK6776E AC DC Converters applications.
- Vacuum Cleaner
- Appliances
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Universal Off-Line Power Supplies
- Wall switches
- Auxiliary Power Supplies
- Battery Chargers
- Air Conditioning
- Set -Top Box (STB) Power Supply
- Power Adaptors