LNK6776V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 26W |
| Max Power Dissipation | 34W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.6mA |
| Output Current | 15μA |
| Output Power | 21W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6776V Overview
An embedded ac to dc converter is included in 12-SDIP (0.412, 10.46mm) Exposed Pad package.The ac dc converter is available in Tube case.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.When the switching frequency reaches 120kHz~136kHz , the process is complete.There are a total of 11 terminations.There are 11 pins on this ac/dc converter.It belongs to a manufacturer family of LinkSwitch?-HP .The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is set to 15μA for the output current.REACH SVHC standard can be found at No SVHC .The AC to DC converter input voltage can be powered under 265V .It is assumed that a coverter generates 21W as its output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.The AC to DC power converter's input voltage (AC) should be below 265V .
LNK6776V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6776V Applications
There are a lot of Power Integrations LNK6776V AC DC Converters applications.
- MPS parts
- MP3
- Switching AC-DC Charger
- Power adapters for network devices
- Portable audio
- Records
- Adapter/Charger for Cell
- DVD players
- Standby Power Supplies
- Cleaners
