Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
12-SDIP (0.412, 10.46mm) Exposed Pad |
Surface Mount |
NO |
Number of Pins |
11 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2014 |
Series |
LinkSwitch™-HP |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
11 |
HTS Code |
8542.39.00.01 |
Subcategory |
Switching Regulator or Controllers |
Power Rating |
30W |
Max Power Dissipation |
41W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
1.78mm |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
1.7mA |
Output Current |
15μA |
Output Power |
25W |
Topology |
Flyback |
Min Input Voltage |
85V |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
120kHz~136kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
Duty Cycle |
64% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Height Seated (Max) |
2.34mm |
Length |
10.46mm |
Width |
10.16mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK6777V Overview
12-SDIP (0.412, 10.46mm) Exposed Pad is the package in which the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .This AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.As a result, the switching frequency reaches 120kHz~136kHz .In total, there are 11 terminations.A ac/dc converter with 11 pins is available.The product is acdc converter of the LinkSwitch?-HP manufacturer family.The ac to dc conversions can be found in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 15μA .You may read the REACH SVHC standard at No SVHC .An input voltage of 265V is available for powering the AC to DC converter.It is assumed that a coverter generates 25W as its output power.The AC to DC inverter may be operated with an input voltage less than 85V volts.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6777V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6777V Applications
There are a lot of Power Integrations LNK6777V AC DC Converters applications.
- Standby Power Supply
- Auxiliary Power Supplies
- Humidifier
- AC/DC Adaptors/Chargers for PDAs
- Replaces linear transformers
- Shaver Charger
- RCC SMPS
- Off--line Battery Charger
- Automotive Telematics
- Records