LNK6778K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 48W |
| Max Power Dissipation | 68W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Length | 10.16mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6778K Overview
It is embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .You can get it in AC/DC power converter Tube .There is a AC/DC converter mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.Switching frequency reaches 120kHz~136kHz Hz.In total, it has 11 terminations.In this ac/dc converter, there are 11 pins.It are possible to mount thare ac dc converters by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-HP manufacturer family.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .An input voltage of less than 85V volts can be used with the AC to DC inverter.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .
LNK6778K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6778K Applications
There are a lot of Power Integrations LNK6778K AC DC Converters applications.
- Power Adaptors
- Universal input AC/DC adapters (15W - 45W)
- IoT Applications
- Power adapters for network devices
- Cellular phone chargers
- Power adapters for monitors
- Consumer electronics
- LED Driver
- AC/DC LED Driver applications
- Z-Wave
