LNK6779K
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 56W |
| Max Power Dissipation | 77W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Length | 10.16mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6779K Overview
12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad is the package in which the ac to dc converter is embedded.The AC/DC power converter is available in Tube .As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .The switching frequency reaches 120kHz~136kHz .As a result, it has had 11 terminations.The ac/dc converter has a total of 11 pins.Surface Mount is a suitable mounting point for the ac dc converters.The product is acdc converter of the LinkSwitch?-HP manufacturer family.You are able to read the REACH SVHC standard at: No SVHC .It is available to power the AC to DC converter input voltage under 265V .It is possible to use the AC to DC inverter with an input voltage less than 85V V.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
LNK6779K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6779K Applications
There are a lot of Power Integrations LNK6779K AC DC Converters applications.
- Standby Power Supplies
- White goods
- Standby Power for General Off-Line Applications
- Wall switches
- Chargers for cell/cordless phones
- Power adapters for monitors
- Standby power supplies for VCR
- Shaver Charger
- AC/DC LED Driver applications
- RCC SMPS
