LNK6779V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 39W |
| Max Power Dissipation | 54W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6779V Overview
In the 12-SDIP (0.412, 10.46mm) Exposed Pad package, the ac to dc converter is embedded.The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.The switching frequency reaches 120kHz~136kHz .A total of 11 terminations have been recorded.Approximately 11 pins are present on the ac/dc converter.It is suitable for mounting by Through Hole .This AC to DC converter belongs to the LinkSwitch?-HP manufacturer family.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 265V .If the input voltage is less than 85V V, the AC to DC inverter can be used.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6779V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6779V Applications
There are a lot of Power Integrations LNK6779V AC DC Converters applications.
- White goods
- Replacements for bulky plug-in transformers
- Standby Power for General Off-Line Applications
- RCC SMPS
- Handheld/Battery-Powered Systems
- Air conditioners
- AC?DC USB chargers for Tablets
- Universal input AC/DC adapters (15W - 45W)
- AC--DC Adapter
- PDAs
