LOG104AIDE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -5°C~75°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Analog Computational Functions |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LOG104 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Power Supplies | +-5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Channels | 1 |
| Analog IC - Other Type | LOG OR ANTILOG AMPLIFIER |
| Operating Supply Current | 1mA |
| Max Output Voltage | 1.5V |
| Response Time | 110 μs |
| Slew Rate | 0.5V/μs |
| Amplifier Type | Logarithmic and Log Ratio |
| Common Mode Rejection Ratio | 105 dB |
| Current - Input Bias | 5pA |
| Voltage - Supply, Single/Dual (±) | ±4.5V~18V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 1.5mV |
| Bandwidth | 0.01MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Min Output Voltage | 1.2V |
| Voltage - Input Offset | 300μV |
| -3db Bandwidth | 45kHz |
| Max Input Current | 3.5mA |
| Positive Input Voltage-Max | 3.5V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LOG104AIDE4 Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. A Tube case is used for delivering the op amp. It is estimated that there will be 8 terminations in the next few months. A total of 8 pins are located on this board. Please take in mind that this instrumentation amplifier should be run at 5V. I would like to specify that this buffer amplifier belongs to the Analog Computational Functions-type of devices. 8 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 1.5mV. This electrical part should be mounted using type Surface Mount. The buffer amplifier functions well at -5°C~75°C as far as operating temperature is concerned. Using an 1mA supply current, this operational amplifier ics can be operated. On the buffer amps, there are 1 channels that can be used. The op amp is rated for an operating supply voltage of 2. This linear amplifier also utiliLOG OR ANTILOG AMPLIFIERes an analog IC known as a LOG OR ANTILOG AMPLIFIER.
LOG104AIDE4 Features
8 Pins
supply voltage of 5V
LOG104AIDE4 Applications
There are a lot of Texas Instruments LOG104AIDE4 Instrumentational OP Amps applications.
- E-book readers
- High speed sample
- Division circuits
- Video conversion and routing
- Video data acquisition
- Semiconductor detectors
- Digital cameras
- Commercial audio systems
- Cinema or auditorium audio system
- Subtraction operation circuits
