LOG114AIRGVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 41.503702mg |
| Operating Temperature | -5°C~75°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Analog Computational Functions |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | LOG114 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 5 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Number of Circuits | 1 |
| Analog IC - Other Type | LOG OR ANTILOG AMPLIFIER |
| Operating Supply Current | 10mA |
| Quiescent Current | 10mA |
| Response Time | 1.5 μs |
| Slew Rate | 5V/μs |
| Amplifier Type | Logarithmic |
| Current - Input Bias | 5pA |
| Max Input Voltage | 5.5V |
| Voltage - Supply, Single/Dual (±) | 4.8V~11V ±2.4V~5.5V |
| Output Current per Channel | 18mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 50MHz |
| Gain Bandwidth Product | 15MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage - Input Offset | 100μV |
| -3db Bandwidth | 5MHz |
| Max Input Current | 10mA |
| Dual Supply Voltage | 5V |
| Positive Input Voltage-Max | 4V |
| Negative Input Voltage-Max | -4V |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LOG114AIRGVT Overview
In the package, you will find a 16-VQFN Exposed Pad-case to contain the op amp ic. There are two types of operational amplifiers in this circuit. A Tape & Reel (TR) case is used to deliver the buffer op amp. There is a growing number of terminations approaching the number of 16. It consists of a total of 16 pins in total. Please take in mind that this instrumentation amplifier should be run at 5V. In order to be more specific, this instrumentation amplifier is one of the types of Analog Computational Functions devices. The op amp ic has an array of 16 pins on it. Op amp ic rates 4mV for input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. It is important to note that this linear amplifier works well at a temperature of -5°C~75°C when it comes to operating temperatureUsing an 10mA supply current, this operational amplifier ics can be operated. On this buffer amplifier, there are 1 circuits. The op amp is rated for an operating supply voltage of 5. The operating supply voltage of instrumentation amplifier is rated 5V voltage. Linear amplifier has a quiescent current of 10mA. An analog IC known as LOG OR ANTILOG AMPLIFIER is also used in this linear amplifier.
LOG114AIRGVT Features
16 Pins
supply voltage of 5V
LOG114AIRGVT Applications
There are a lot of Texas Instruments LOG114AIRGVT Instrumentational OP Amps applications.
- Car stereo
- Semiconductor detectors
- Voltage regulation circuit
- Multimedia playback equipment
- earphone
- Displayers for aircraft and air transportation control systems
- Radar
- Video data acquisition
- MP3
- Scintillation detectors
