Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-25°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
Differential |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
15V |
Base Part Number |
LP211 |
Pin Count |
8 |
Output Type |
Open-Collector, Open-Emitter |
Operating Supply Voltage |
28V |
Number of Elements |
1 |
Nominal Supply Current |
300μA |
Max Supply Current |
300μA |
Quiescent Current |
300μA |
Response Time |
1.2 μs |
Voltage - Supply, Single/Dual (±) |
3.5V~30V ±1.75V~15V |
Output Current per Channel |
25mA |
Input Offset Voltage (Vos) |
7.5mV |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Voltage Gain |
100dB |
Dual Supply Voltage |
9V |
Input Bias Current |
100nA |
Voltage - Input Offset (Max) |
7.5mV @ ±15V |
Current - Input Bias (Max) |
0.1μA @ ±15V |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
LP211DRG4 Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Open-Collector, Open-Emitter is being used.The chip is packaged with Tape & Reel (TR) .There are8 terminals on the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 15V voltage.In terms of type, this is a typical Differential comparator.There are a total of 1 elements in it.As a result, it contains 8 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -25°C~85°C in order to prevent malfunctions.This comparator has 8 pins.You can search LP211 if you are looking for more pin-to-pin solutions.There is a quiescent current of 300μA in this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 300μA when using the device.If the current supply exceeds 300μA , the comparator could malfunction.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 100dB .In order to operate normally, a supply voltage of 0 is required.Comparator electronics is packed in TR , and is commonly used in ADC circuComparator electronicss.
LP211DRG4 Features
Open-Collector, Open-Emitter output capability
Differential IC
Employing 1 elements
Operates under -25°C~85°C
Quiescent Current: 300μA
Voltage Gain: 100dB
LP211DRG4 Applications
There are a lot of Texas Instruments LP211DRG4 linear comparators applications.
- Wireless Base Stations
- Lithium ion battery monitoring
- Alarm and Monitoring Circuits
- General Purpose Low Voltage Applications
- Power Supervision
- Laptop Computers
- Metering Systems
- Set Top Boxes
- Factory automation & control
- Automotive