LP2901D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 1.025W |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Nominal Supply Current | 100μA |
| Power Dissipation | 533mW |
| Output Current | 30mA |
| Max Supply Current | 25μA |
| Quiescent Current | 100μA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~30V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Supply Voltage Limit-Max | 36V |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 30mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP2901D Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has a CMOS, MOS, Open-Collector output.Electronic comparator is shipped by Tube .Electronic comparator is possible to find the 14 terminals of the comparator.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .There are a total of 4 elements in it.The board includes 14 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.This comparator has 14 pins.You may wish to search LP2901 for more solutions that address your specific needs.This comparator presents a quiescent current of 100μA .Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 100μA when using the device.Current supply exceeding 25μA could cause disfunction of the compartator.This device requires 5V power supplies to operate.According to the voltage formula, the part has a voltage gain of 113.98dB .4 channels cooperate together to maintain the output quality.The operating supply voltage for normal operation should be 28V .
LP2901D Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP2901D Applications
There are a lot of Texas Instruments LP2901D linear comparators applications.
- Window Comparators
- Battery-Powered Electronics
- Hand-Held Electronics
- DC/DC and AC/DC power supplies
- Factory automation & control
- Pulse, Squarewave, and Time Delay Generators
- Power Supervision
- Zero-Crossing Detectors
- Self-diagnostics
- Window Comparators, Multivibrators
