LP2901DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Nominal Supply Current | 100μA |
| Power Dissipation | 533mW |
| Output Current | 30mA |
| Max Supply Current | 25μA |
| Quiescent Current | 100μA |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 3V~30V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 30mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP2901DR Overview
For convenience, it is packaged in 14-SOIC (0.154, 3.90mm Width) .There is a CMOS, MOS, Open-Collector output type for this comparator.The part will be shipped by Tape & Reel (TR) .There are14 terminals on the comparator.The electrical component here belongs to the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .The total number of elements is 4 .The pinout of the component starts from 14 pins it has.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 14 pins.Search LP2901 to find more pin-to-pin solutions.In this comparator, the quiescent current is 100μA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 100μA for normal use.If the current supply exceeds 25μA , the comparator could malfunction.The device can be powered by 5V power supplies.You can input a maximum current of 25nA into this device.In accordance with the voltage formula, the part's voltage gain is 113.98dB .The output quality of 4 channels is maintained by cooperating with each other.A normal operation requires a voltage of 28V .The device is packaged in TR and is often used in ADC circuits.
LP2901DR Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP2901DR Applications
There are a lot of Texas Instruments LP2901DR linear comparators applications.
- Zero-Crossing Detectors
- Simple Analog-to-Digital Converters (ADCs)
- Analog front end
- Factory automation & control
- Handheld Instruments
- Window Comparators, Multivibrators
- Alarm and Monitoring Circuits
- Current and voltage sensing
- Mobile Phones
- Mobile Phones and Tablets
