LP2901DRE4
| Parameters | |
|---|---|
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 25μA |
| Output Current | 30mA |
| Max Supply Current | 25μA |
| Quiescent Current | 100μA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~30V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 30mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
LP2901DRE4 Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, MOS, Open-Collector is used for this comparator.As a result, it is designed with Tape & Reel (TR) package.You can find 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Speaking of types, this is a typical General Purpose comparator.There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 14 pins on the comparator.Search LP2901 to find more pin-to-pin solutions.A quiescent current of 100μA is displayed by this comparator.There is a Surface Mount for mounting it on a PCB or other board.Normal operation of the device requires a nominal supply current of 25μA .A current supply greater than 25μA may result in the comparator malfunctioning.The device can be powered by 5V power supplies.You can input a maximum current of 25nA into this device.Comparator electronics follows that the voltage gain of the part is 113.98dB .With a TR package, this device is designed for general use (usually in ADC circuits).
LP2901DRE4 Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP2901DRE4 Applications
There are a lot of Texas Instruments LP2901DRE4 linear comparators applications.
- System control and monitoring
- Ultra-Low Power Systems
- Infotainment & cluster
- Wide Range VCO; MOS Clock Timers
- Portable and Battery-Powered Systems
- Consumer Medical Electronics
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Automatic Test Equipment
- General-Purpose, Low-Voltage Applications
