LP2901DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 100μA |
| Output Current | 30mA |
| Max Supply Current | 100μA |
| Quiescent Current | 100μA |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 3V~30V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 30mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP2901DRG4 Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.The comparator has a CMOS, MOS, Open-Collector output.Ready for shipping in Tape & Reel (TR) package.The device is designed with 14 terminations.Electronic comparator is a part of Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.The device includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 14 pins on the comparator.You can find more pin-to-pin solutions by searching LP2901 .This comparator presents a quiescent current of 100μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 100μA when using the device.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 100μA .The device can be powered by 5V power supplies.A maximum current of 25nA can be supplied to the device.From the voltage formula, the voltage gain of the part is 113.98dB .For normal operation, the operating supply voltage must be 28V .This device is usually used in ADC circuits (packaged in TR ).
LP2901DRG4 Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP2901DRG4 Applications
There are a lot of Texas Instruments LP2901DRG4 linear comparators applications.
- Zero-Crossing Detectors
- Wide Range VCO; MOS Clock Timers
- Notebooks and PDAs
- Laptop Computers
- Self-diagnostics
- Consumer Medical Electronics
- Mobile Communications
- Industrial
- Battery-Powered Electronics
- Wireless Base Stations
