LP2901IDRG4Q1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP2901 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 100μA |
| Output Current | 30mA |
| Max Supply Current | 100μA |
| Quiescent Current | 100μA |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 3V~30V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 30mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP2901IDRG4Q1 Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .A comparator with an output type of CMOS, MOS, Open-Collector is being used.This package has been designed with Tape & Reel (TR) .The comparator has a total of 14 terminals.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 4 elements in total.The device includes 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions for your special requirements by searching LP2901 .As a result, this comparator displays a quiescent current of 100μA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 100μA when using the device.If the current supply exceeds 100μA , the comparator could malfunction.In order to operate the device, 5V power supplies are sufficient.A maximum current of 25nA can be supplied to the device.In accordance with the voltage formula, the part's voltage gain is 113.98dB .Comparator electronics is part of the Automotive, AEC-Q100 comparator series.This device is usually used in ADC circuits (packaged in TR ).
LP2901IDRG4Q1 Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP2901IDRG4Q1 Applications
There are a lot of Texas Instruments LP2901IDRG4Q1 linear comparators applications.
- Battery management and protection
- Current and voltage sensing
- Pulse, Squarewave, and Time Delay Generators
- Wireless Base Stations
- Portable and Battery-Powered Systems
- Battery-Powered Electronics
- Self-diagnostics
- Mobile Phones and Tablets
- Battery-Powered Electronics
- Infotainment & cluster
