banner_page

LP2901N

Through Hole Tube 30mA mA 1.3 μs μs Linear Comparators 113.98dB dB 25nA pA 100μA μA 5mV mV Through Hole


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LP2901N
  • Package: 14-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 125
  • Description: Through Hole Tube 30mA mA 1.3 μs μs Linear Comparators 113.98dB dB 25nA pA 100μA μA 5mV mV Through Hole (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 14-DIP (0.300, 7.62mm)
Number of Pins 14
Weight 927.99329mg
Operating Temperature -40°C~85°C
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Type General Purpose
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Comparator
Technology BIPOLAR
Terminal Position DUAL
Number of Functions 4
Supply Voltage 5V
Base Part Number LP2901
Pin Count 14
Output Type CMOS, MOS, Open-Collector
Operating Supply Voltage 28V
Number of Elements 4
Power Supplies 5V
Nominal Supply Current 100μA
Power Dissipation 533mW
Output Current 30mA
Max Supply Current 25μA
Quiescent Current 100μA
Response Time 1.3 μs
Voltage - Supply, Single/Dual (±) 3V~30V
Output Current per Channel 20mA
Input Offset Voltage (Vos) 5mV
Voltage Gain 113.98dB
Supply Voltage Limit-Max 36V
Max Input Current 25nA
Input Bias Current 25nA
Voltage - Input Offset (Max) 5mV @ 30V
Current - Input Bias (Max) 0.025μA @ 5V
Current - Output (Typ) 30mA @ 5V
Height 5.08mm
Length 19.3mm
Width 6.35mm
Thickness 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LP2901N Overview


In order to make transportation easier, it is packaged in 14-DIP (0.300, 7.62mm) .This comparator is of the CMOS, MOS, Open-Collector output type.The part is shipped by Tube .The comparator has 14 terminals.Other Comparator like the device play a important role in the industry.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.Currently, it consists of only 4 elements.There are 14 pins on this board.Through Hole universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has a pin count of 14 .If you require more pin-to-pin solutions, search LP2901 for more options.The comparator presents a quiescent current of 100μA volts.This component has a Through Hole mount for mounting to PCBs or other boards.The nominal supply current of the device should be 100μA for normal use.If the current supply exceeds 25μA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum current of 25nA into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 113.98dB .Normal operation requires 28V operating supply voltage.

LP2901N Features


CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB

LP2901N Applications


There are a lot of Texas Instruments LP2901N linear comparators applications.

  • Multivibrators and High-Voltage Digital Logic Gates
  • Self-diagnostics
  • System control and monitoring
  • Battery-Powered Electronics
  • High-Speed Sampling Circuits
  • Set Top Boxes
  • Window Comparators
  • Infotainment and Clusters
  • Laptop Computers
  • General Purpose Low Voltage Applications

Write a review

Note: HTML is not translated!
    Bad           Good