LP2902M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP2902 |
| Pin Count | 14 |
| Operating Supply Voltage | 13V |
| Power Supplies | 5/30V |
| Number of Channels | 4 |
| Operating Supply Current | 85μA |
| Nominal Supply Current | 85μA |
| Output Current | 20mA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~26V ±1.5V~13V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 92.04dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 26V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.02μA |
| Programmable Power | NO |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP2902M/NOPB Overview
In the package, you will find a 14-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. An op amp of this type is a General Purpose-type. Upon delivery, op amp ic is packaged in a Tube case. In recent months, the number of terminations has approached 14. There are a total of 14 pins on this op amp. The linear amplifier should be run at 5V at all times, so please keep that in mind when using it. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. Linear amplifier includes 14 pins. In terms of the input offset voltage, instrumentation amplifier rates at 4mV. This electronic part is recommended for mounting type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Using an 85μA supply current, this operational amplifier ics can be operated. Maintain 92.04dB as the voltage gain. 4 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 13V voltage.
LP2902M/NOPB Features
14 Pins
supply voltage of 5V
92.04dB voltage gain
LP2902M/NOPB Applications
There are a lot of Texas Instruments LP2902M/NOPB Instrumentational OP Amps applications.
- Band-pass filter
- Large motor controllers
- Video data acquisition
- Automation control systems
- Blood pressure sensors
- Oscilloscopes
- Power generator
- Signal filtering
- PDA
- Digital cameras
