LP324MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LP324 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Power Supplies | 5/30V |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Nominal Supply Current | 85μA |
| Output Current | 20mA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 93.98dB |
| Average Bias Current-Max (IIB) | 0.02μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 2mV |
| Current - Output / Channel | 10mA |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Programmable Power | NO |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP324MT/NOPB Overview
In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. An op amp ic of the General Purpose type. It comes in a Tube case, which protects instrumentation amplifier from damage during delivery. During the past two weeks, there have been close to 14 terminations. Buffer amplifier has a total of 14 pins. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. A total of 14 pins are present on the instrumentation amplifier. Regarding input offset voltage, buffer amplifier rates 4mV voltage. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureThere should be no change in the voltage gain. This op amp ic has 4 circuits. 4 channels are available on the instrumentation amplifier. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LP324MT/NOPB Features
14 Pins
supply voltage of 5V
93.98dB voltage gain
LP324MT/NOPB Applications
There are a lot of Texas Instruments LP324MT/NOPB Instrumentational OP Amps applications.
- MP3
- Thermocouples
- Strain gauges
- Portable media players
- High input resistance broadband
- Measurements of Wheatstone bridge
- Division circuits
- Ultrasound transducers
- Semiconductor detectors
- Video conversion and routing
