LP324N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LP324 |
| Pin Count | 14 |
| Operating Supply Voltage | 16V |
| Power Supplies | +-1.5/+-16/3/32V |
| Number of Channels | 4 |
| Operating Supply Current | 85μA |
| Nominal Supply Current | 150μA |
| Output Current | 10mA |
| Max Supply Current | 150μA |
| Slew Rate | 0.05V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 3V~32V ±1.5V~16V |
| Output Current per Channel | 10mA |
| Input Offset Voltage (Vos) | 4mV |
| Bandwidth | 100 kHz |
| Unity Gain BW-Nom | 100 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 32V |
| Voltage - Input Offset | 2mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.01μA |
| Programmable Power | NO |
| Dual Supply Voltage | 9V |
| Input Offset Current-Max (IIO) | 0.002μA |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP324N Overview
In order to protect the op amps, a 14-DIP (0.300, 7.62mm) case is used. Buffer amps of this type are called General Purpose-types. Upon delivery, op amp ic is packaged in a Tube case. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. It is important to remember that this op amp should be operated at a voltage of 5V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. In total, the buffer amplifier consists of 14 pins. In terms of input offset voltage, operational amplifier rates 4mV. This electronic part is best mounted with type Through Hole. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of 0°C~70°C . It is possible to operate this buffer amplifier from a supply current of 85μA . Keeping the voltage gain at 100dB is the best course of action. Instrumentation amplifier has 4 channels on it. The operating supply voltage of instrumentation amplifier is rated 16V voltage.
LP324N Features
14 Pins
supply voltage of 5V
100dB voltage gain
LP324N Applications
There are a lot of Texas Instruments LP324N Instrumentational OP Amps applications.
- Broadcasting
- Portable media players
- Power generator
- Hand-held batteries
- Radar
- Television broadcasting equipment
- PDA
- Cinema or auditorium audio system
- Information processing
- Weighing systems
