LP339DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Operating Supply Voltage | 28V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 25μA |
| Output Current | 30mA |
| Max Supply Current | 25μA |
| Quiescent Current | 100μA |
| Response Time | 1.3 μs |
| Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Supply Voltage Limit-Max | 36V |
| Dual Supply Voltage | 9V |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 30V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 30mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP339DRG4 Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .Output type CMOS, MOS, Open-Collector is used for this comparator.We ship the part through Tape & Reel (TR) .The device is designed with 14 terminations.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.The total number of elements is 4 .The device includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.14 pins are available on the comparator.You can search LP339 if you are looking for more pin-to-pin solutions.A quiescent current of 100μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 25μA .A current supply greater than 25μA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.The voltage gain of the part is indicated by 113.98dB in the voltage formula.The operating supply voltage for normal operation should be 28V .With a TR package, this device is designed for general use (usually in ADC circuits).
LP339DRG4 Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP339DRG4 Applications
There are a lot of Texas Instruments LP339DRG4 linear comparators applications.
- Infotainment and Clusters
- High-Speed Differential Line Receiver
- Simple Analog-to-Digital Converters (ADCs)
- Wide Range VCO; MOS Clock Timers
- General-Purpose Portable Devices
- Battery-Powered Electronics
- Threshold Detectors
- Alarm and Monitoring Circuits
- Motor drives
- Industrial
