LP339M
| Parameters | |
|---|---|
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 100μA |
| Power Dissipation | 570mW |
| Output Current | 10mA |
| Max Supply Current | 100μA |
| Quiescent Current | 100μA |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Input Bias Current | 40nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 10mA |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
LP339M Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a CMOS, MOS, Open-Collector output type for this comparator.Ready for shipping in Tube package.There are14 terminals on the comparator.The chip belongs to Comparator .This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In general, the chip type can be classified as General Purpose .A total of 14 pins are included.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 14 pins on the comparator.Search LP339 to find more pin-to-pin solutions.A quiescent current of 100μA is displayed by this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 100μA .A current supply greater than 100μA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.Electronic comparator is possible to input a maximum of 25nA current into the device.In accordance with the voltage formula, the part's voltage gain is 113.98dB .
LP339M Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP339M Applications
There are a lot of Texas Instruments LP339M linear comparators applications.
- Industrial
- Window Comparators, Multivibrators
- Threshold Detectors
- DC/DC and AC/DC power supplies
- Wireless Base Stations
- Wearable Devices
- Body Control Modules
- Portable Battery Monitoring
- Battery management and protection
- Metering Systems
