LP339M/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Nominal Supply Current | 21.25μA |
| Power Dissipation | 570mW |
| Output Current | 10mA |
| Max Supply Current | 21.25μA |
| Propagation Delay | 8 μs |
| Quiescent Current | 100μA |
| Turn On Delay Time | 8 μs |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Dual Supply Voltage | 9V |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 10mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LP339M/NOPB Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.The comparator has an output type of CMOS, MOS, Open-Collector .This device is designed in Tube case.You can find 14 terminals of the comparator.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .Electronic comparator has 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching LP339 .The comparator displays a quiescent current of 100μA .There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 21.25μA .If the current supply exceeds 21.25μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.Electronic comparator is possible to input a maximum of 25nA current into the device.Comparator electronics is clear from the voltage formula that the voltage gain of the part is 113.98dB .
LP339M/NOPB Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP339M/NOPB Applications
There are a lot of Texas Instruments LP339M/NOPB linear comparators applications.
- Automatic Test Equipment
- Analog front end
- Power Supervision
- Window Comparators
- Infotainment and Clusters
- Mobile Phones
- Body Control Modules
- Power management
- Current and voltage sensing
- Ultra-Low Power Systems
