LP339MX
| Parameters | |
|---|---|
| Max Input Current | 25nA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 235 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 25μA |
| Power Dissipation | 570mW |
| Output Current | 10mA |
| Max Supply Current | 100μA |
| Quiescent Current | 100μA |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Supply Voltage Limit-Max | 36V |
LP339MX Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.Output type CMOS, MOS, Open-Collector is used for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 14 terminals.The electrical component in this case belongs to the Comparator families.A comparator supplied with 5V voltage can complete many demanding tasks.Speaking of types, this is a typical General Purpose comparator.Electronic comparator consists of 4 elements in total.The device is equipped with 14 pins.The type of mounting recommended is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.The comparator consists of 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search LP339 .This comparator presents a quiescent current of 100μA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 25μA .A current supply greater than 100μA may cause the comparator to malfunction.This device requires 5V power supplies to operate.Input current to the device cannot exceed 25nA .In accordance with the voltage formula, the part's voltage gain is 113.98dB .Often found in ADC circuits, this device is packed in TR .
LP339MX Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP339MX Applications
There are a lot of Texas Instruments LP339MX linear comparators applications.
- Analog front end
- Industrial
- Window Comparators
- Laptop Computers
- Alarm and Monitoring Circuits
- Body Control Modules
- Appliances
- Hand-Held Electronics
- Wireless Base Stations
- Automotive
