LP339MX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 570mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | LP339 |
| Pin Count | 14 |
| Output Type | CMOS, MOS, Open-Collector |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 100μA |
| Power Dissipation | 570mW |
| Output Current | 10mA |
| Max Supply Current | 21.25μA |
| Quiescent Current | 100μA |
| Response Time | 8 μs |
| Voltage - Supply, Single/Dual (±) | 2V~36V ±1V~18V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Supply Voltage Limit-Max | 36V |
| Max Input Current | 25nA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.025μA @ 5V |
| Current - Output (Typ) | 10mA @ 5V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LP339MX/NOPB Overview
To facilitate transportation, it comes packaged in 14-SOIC (0.154, 3.90mm Width) .There is a comparator of type CMOS, MOS, Open-Collector output on this device.The chip is packaged with Tape & Reel (TR) .There are 14 terminals on the comparator.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical General Purpose comparator.The total number of elements is 4 .Electronic comparator has 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to 0°C~70°C .The comparator has 14 pins.Try search LP339 to get more pin-to-pin solutions for your special needs.A quiescent current of 100μA is displayed by this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.Electronic comparator is recommended that the nominal supply current of the device be 100μA .A current supply greater than 21.25μA may cause the comparator to malfunction.There is sufficient power to run the device from 5V power supplies.Input current to the device is limited to 25nA .Based on the voltage formula, the voltage gain of the part is 113.98dB .This device is usually used in ADC circuits (packaged in TR ).
LP339MX/NOPB Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP339MX/NOPB Applications
There are a lot of Texas Instruments LP339MX/NOPB linear comparators applications.
- Simple Analog-to-Digital Converters (ADCs)
- Set Top Boxes
- Hand-Held Electronics
- Industrial
- Building automation
- Security Detection Systems
- Threshold Detectors
- High-Speed Differential Line Receiver
- Consumer Medical Electronics
- Metering Systems
