Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
DIP, Through Hole |
Mounting Type |
Through Hole |
Package / Case |
14-DIP (0.300, 7.62mm) |
Number of Pins |
14 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparator |
Max Power Dissipation |
570mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Number of Functions |
4 |
Supply Voltage |
5V |
Current Rating |
30A |
Base Part Number |
LP339 |
Pin Count |
14 |
Output Type |
CMOS, MOS, Open-Collector |
Operating Supply Voltage |
28V |
Power Supplies |
5V |
Number of Circuits |
4 |
Nominal Supply Current |
25μA |
Power Dissipation |
570mW |
Output Current |
30mA |
Max Supply Current |
100μA |
Propagation Delay |
8 μs |
Quiescent Current |
100μA |
Turn On Delay Time |
8 μs |
Response Time |
8 μs |
Voltage - Supply, Single/Dual (±) |
2V~36V ±1V~18V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
113.98dB |
Supply Voltage Limit-Max |
36V |
Max Input Current |
25nA |
Dual Supply Voltage |
9V |
Input Bias Current |
25nA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.025μA @ 5V |
Current - Output (Typ) |
30mA @ 5V |
Height |
5.33mm |
Length |
19.177mm |
Width |
6.35mm |
Thickness |
3.429mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
LP339N/NOPB Overview
To facilitate transportation, it comes packaged in 14-DIP (0.300, 7.62mm) .A comparator with a CMOS, MOS, Open-Collector output is used here.This chip is designed with the Tube package.The comparator has 14 terminals.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .As a result, it contains 14 pins.In general, mounting type Through Hole is recommended.To ensure proper functioning, the operating temperature should be set to 0°C~70°C .14 pins are available on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search LP339 .The comparator displays a quiescent current of 100μA .There is a DIP, Through Hole on the board for mounting to a PCB or other board.Normal operation of the device requires 25μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 100μA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5V power supplies.You can input a maximum current of 25nA into this device.The voltage formula shows that the part has a voltage gain of 113.98dB .The operating supply voltage for normal operation should be 28V .
LP339N/NOPB Features
CMOS, MOS, Open-Collector output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 100μA
Voltage Gain: 113.98dB
LP339N/NOPB Applications
There are a lot of Texas Instruments LP339N/NOPB linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Notebooks and PDAs
- Automotive
- Portable Battery Monitoring
- Lithium ion battery monitoring
- Consumer Medical Electronics
- Window Comparators
- Building automation
- Portable and Battery-Powered Systems
- High-Speed Differential Line Receiver