LP3470IM5-2.63/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Output Voltage | 400mV |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 300mW |
| Output Current | 10mA |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 2.6037V |
| Max Reset Threshold Voltage | 2.6563V |
| Threshold Voltage | +2.63V |
| Undervoltage Threshold | 2.6037V |
| Overvoltage Threshold | 2.6563V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP3470IM5-2.63/NOPB Overview
It is mounted through 5 terminals on the power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 2.4V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. The power management is mounted by Surface Mount. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 5 pins. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 500mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 16μA volt supply current. To find similar IC managements from the manufacturer, you can always search by LP3470.
LP3470IM5-2.63/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5-2.63/NOPB Applications
There are a lot of Texas Instruments LP3470IM5-2.63/NOPB Voltage Supervisors applications.
- Dash board
- Microprocessor system
- Multi-voltage system
- Radio
- Utility meter
- Digitally controlled LDO regulators circuit
- Consumer electronics
- Precision measurement
- Electrical fire monitoring system
- Refrigeration
