LP3470IM5-2.93/NOPB
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.93V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 2.9007V |
| Max Reset Threshold Voltage | 2.9593V |
| Threshold Voltage | +2.93V |
| Undervoltage Threshold | 2.9007V |
| Overvoltage Threshold | 2.9593V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
LP3470IM5-2.93/NOPB Overview
This power management consists of 5 mounting terminals on which it can be mounted. There is a Cut Tape (CT)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.4V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. Supply voltage (Vsup) should be at least 500mV for this power management. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 16μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by LP3470.
LP3470IM5-2.93/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5-2.93/NOPB Applications
There are a lot of Texas Instruments LP3470IM5-2.93/NOPB Voltage Supervisors applications.
- Automotive power systems
- Refrigeration
- Battery cars
- Power distribution systems of ICU
- Important electronics for automotive safety
- Microprocessor system
- Radio
- Rechargeable batteries
- Microcontroller system
- Electric heating appliances
