Parameters |
Lifecycle Status |
NRND (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Part Status |
Not For New Designs |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Additional Feature |
RESET THRESHOLD VOLTAGE IS 3.08 V |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
300mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1V |
Base Part Number |
LP3470 |
Output |
Open Drain or Open Collector |
Pin Count |
5 |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
500mV |
Operating Supply Current |
16μA |
Power Dissipation |
300mW |
Adjustable Threshold |
NO |
Quiescent Current |
16μA |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
3.08V |
Number of Voltages Monitored |
1 |
Reset Timeout |
1ms Minimum |
Supply Current-Max (Isup) |
0.03mA |
Min Reset Threshold Voltage |
3.0492V |
Max Reset Threshold Voltage |
3.1108V |
Threshold Voltage |
+3.08V |
Undervoltage Threshold |
3.0492V |
Overvoltage Threshold |
3.1108V |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LP3470IM5-3.08 Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. Tape & Reel (TR)-packaging is used. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. In a 1V supply voltage, the power management conducts. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 5 pins are located on this power management. Power managment ic pin count is 5. A voltage (Vsup) that doesn't fall below 500mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TJ. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 16μA is the recommended value. There are other features such as RESET THRESHOLD VOLTAGE IS 3.08 V to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to LP3470, which is the base power ics number.
LP3470IM5-3.08 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5-3.08 Applications
There are a lot of Texas Instruments LP3470IM5-3.08 Voltage Supervisors applications.
- Functional modules
- Analog circuit
- Microcontroller system
- Automotive permanent magnet synchronous motors
- Electrical fire monitoring system
- Smartphones
- Important electronics for automotive protection
- Military electronics
- Embedded computing
- Solar power charger