banner_page

LP3470IM5-4.00/NOPB

2.4V5 Terminals 5-Pin LP3470 Voltage supervisor1 Channels Min 500mV Max 5.5V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LP3470IM5-4.00/NOPB
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 124
  • Description: 2.4V5 Terminals 5-Pin LP3470 Voltage supervisor1 Channels Min 500mV Max 5.5V (Kg)

Details

Tags

Parameters
Lifecycle Status NRND (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature -40°C~85°C TJ
Packaging Cut Tape (CT)
JESD-609 Code e3
Pbfree Code yes
Part Status Not For New Designs
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 300mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 2.4V
Base Part Number LP3470
Output Open Drain or Open Collector
Pin Count 5
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 500mV
Operating Supply Current 16μA
Nominal Supply Current 30μA
Power Dissipation 300mW
Adjustable Threshold NO
Quiescent Current 16μA
Watchdog Timer No
Reset Active Low
Voltage - Threshold 4V
Number of Voltages Monitored 1
Reset Timeout 1ms Minimum
Supply Current-Max (Isup) 0.03mA
Min Reset Threshold Voltage 3.96V
Max Reset Threshold Voltage 4.04V
Threshold Voltage +4V
Undervoltage Threshold 3.96V
Overvoltage Threshold 4.04V
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LP3470IM5-4.00/NOPB Overview


It is mounted through 5 terminals on the power management. Packaged in the form of a Cut Tape (CT), power management is easy to use. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2.4V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 5 pins in it. This power management system has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 500mV, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. In order to maintain a stable supply current for the power management, 16μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using LP3470, the base power ics number.

LP3470IM5-4.00/NOPB Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current

LP3470IM5-4.00/NOPB Applications


There are a lot of Texas Instruments LP3470IM5-4.00/NOPB Voltage Supervisors applications.

  • Leakage protection
  • Kitchen appliances
  • Power communication system
  • Efficient information transmission
  • Consumer electronics
  • Microcontroller system
  • Urban rail transit weak current power monitoring
  • Sensitive sensors
  • Unattended substation automation
  • Display equipment

Write a review

Note: HTML is not translated!
    Bad           Good